Saturday, June 10, 2017

90046-CR Vortex II Multi Speed 12 volt RV Roof Vent Upgrade Kit classAcustoms









 How to Install a


1. Remove the handle from the vent.


 2. Remove the screen from the vent.

 3. Locate the cross bar in the lid of the vent, there will be tabs on both the top and bottom of the bar you will need to flatten these down.



 Be sure to flatten the bottom ones as well.

 4. Locate the gears for the fan, you will need to remove the screws on the front side of the fan for the gear box to move.

 5. After the screws have been removed you will pull the gear box out and simply move it to the bottom hole. Remember to replace your screws.




6. Line the gear box and crank gear up, the gears should fit together easily.

 7. Don't forget to secure your vent with the screws provided into the outer rim of the Vortex II

8. Last attach the handle.

You will also need to be aware how to install a 12 volt electrical item in order to wire this unit.




 These are photos of an installed Vortex II 
you will need to have a roof vent already installed if you are ordering the 

it is just the insert not an entire unit.


Once installed how it looks








Vortex Unit Only, you will need a roof vent to install this unit into

**12 volt ONLY 110/115/220 volt such as in a house or generator will damage the unit**
12 volt Fan Motor
9' Fan Blade
1.8 amps of power required

Multiple Speed Fan
Vortex Fan Speed 188 CFM (188 Cubic Feet Per Minute)
High Velocity air fan system - over 300% more air flow movement
Multiple Speed Fan 3 Speeds Outward and 2 Speeds Inward

Removable Fine Mesh Screen included
Manual Crank Style Handle Included

NO Interior Garnish Ring
Fits standard RV Roof Vents





If upgrading non-powered vent 18 Gauge Wire to 12 volt DC recommended
Testing Unit before installing you must have unit facing correct direction, face down like when installed in rv, or blade will rub
Remove garnish ring from existing roof vent and save screws for reinstallation
Remove crank handle, screen and fan unit from existing roof vent

Existing Ventline Vents: Unscrew and move gear drive to alternate position as shown on installation instructions
Existing Jensen Vents: Unscrew and move gear drive to alternate position as shown on installation instructions
Hold Vortex unit near ceiling and attach Vortex wires to RV 12 volt power wires
DO NOT let the unit hang by wires as you will damage the unit

Secure Vortex unit onto existing vent frame, making certain the crank spindle is properly aligned and seated in the matching gear drive (if necessary use knob to rotate gears to achieve alignment)

Secure gear drive spindle with screw
Make sure wires are out of the way of the fan blade
Attach screen frame, inserting 4 tabs and rotating clockwise until tight
Attach manual crank knob with screw

Reinstall original garnish ring






Class A Customs
1130 County Road 6 West
Elkhart, IN 46514
 
Call Us: (574) 206-0101


Saturday, June 3, 2017

Folding Pop-up Camper snowmobile Lid Lock Latches Roof Latch Black or White classAcustoms





Fold Down Camper Latch And Catch is used to secure the lid of your fold down camper and snowmobile trailer for travel.

It is made of durable steel and powder coated in a white finish.

The Latch and Catch fit most major pop-up camper brands such as: Coleman, Starcraft, Palomino, Coachmen, Flagstaff, Rockwood, Viking, Jayco, Dutchmen, Skamper, and other pop-up camper brands.

Product Features:
  • Constructed of powder coated steel
  • Black
  • White


 







Class A Customs
1130 County Road 6 West
Elkhart, IN 46514
 
Call Us: (574) 206-0101