Surface Mounted Screws not provided Used in RV's for Entry step Illumination, Trailer License Plate Lighting, & Boat Auxiliary Interior lighting Weatherproof Chrome housing LED 12 volt - You can not put this in a house or plug into a wall - 110/115/220 volt will damage the unit. All-weather molded plastic housing and durable lens protect against corrosion. DOT Approved
Measurements: 2 9/16" length x 1 3/16" wide X 15/16" tall
Screw holes: 2" Centered
LED License Plate Tag Light CHROME Boat Trailer RV Truck Interior Step Light lamp bracket camper trailer door 1212-319 classAcustoms
Class A Customs 1130 County Road 6 West Elkhart, IN 46514
Vinyl trim molding is 1" wide Color: White UV Resistant Warp Resistant Installs in aluminum or plastic channel on the side of your RV to cover the screws Pinch the edges to pop in to the channel / then add a bit of silicone at the end to keep molding from moving
Items are purchased in bulk quantities so no retail box.
If you already have a garnish that you are comfortable re-using you do not need to purchase a unit with a garnish ring. Be sure to check the thickness of your roof to determine the correct size garnish ring to purchase with your roof vent.
Heng's Part # 90090
1” OEM Inside Garnish Shroud Color White 13" x 13" x 1 ⅛” Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof)
Heng's Part # 90092
3” OEM Inside Garnish Shroud Color White 13" x 13" x 3” Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof)
Heng's Part # 90094
4” OEM Inside Garnish Shroud Color White 13" x 13" x 4” Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof)
Heng's Part # 90144
5” OEM Inside Garnish Shroud Color White 13" x 13" x 5 ¼” Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof)
Heng's Part # 90146
6” OEM Inside Garnish Shroud Color White 13" x 13" x 6” Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof)
Heng's RV Escape Hatch
Heng's Brand Escape Hatches
The current design of Heng's brand escape hatches will not match older style Heng's escape hatches.
Heng's purchased the Jensen/Elixir brand name some years ago.
The following part numbers and design of the escape hatches are the only Heng's style we carry.
Ventline no longer makes escape hatches, the sizes and hinge assembly are not the same as Heng's, Elixir or Jensen brand, you can not put a Heng's lid on a Ventline escape hatch.
How are Escape Hatches Measured?
The name of the Heng's escape hatches are shortened names to easily identify the escape hatch, it is not the cut-out measurement or the flange measurement.
You will need to verify your cut-out dimension to accurately find the escape hatch you are needing.
13 x 20 Escape Hatch by Heng’s Part # 31121-C2- This Escape Hatch has a Plastic Frame Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 14 ¼” X 21" Exterior Mounting Flange Dimensions (sits on the top of your unit) 16 ¾” X 23 ¾”
Lid Measurements 15 ½” x 22 ½”
Lid Only Part # 90007-C1
15 x 22 Escape Hatch by Heng’s Part # 58621-C2 Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 17 ⅜” X 24 ⅝” Exterior Mounting Flange Dimensions (sits on the top of your unit) 19" X 26 ½”
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 19 ¼ " X 26 ¼ " Exterior Mounting Flange Dimensions (sits on the top of your unit) 21" X 28"
Lid Measurements 19 ½” x 26 ⅜” Lid Only Part # 90088-C1
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 21 ¼ " x 21 ¼ " Exterior Mounting Flange Dimensions (sits on the top of your unit) 23" x 23"
Lid Measurements 21 ½” x 21 ½”
Lid Only Part # 90129-C1
26 x 26 Escape Hatch by Heng’s Part # 68631-C2 Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 25 1/2" x 25 1/2" Exterior Mounting Flange Dimensions (sits on the top of your unit) 27 ½ " x 27 ½ ”
COVERAGE up-to 200 sq. feet of surface area per gallon* (Your Unit Feet Length x Feet Height = Feet Squared)
APPLICATION Can be applied over galvanized steel, bituminous built-up roofs( BUR's), concrete, wood polyurethane foam and asphalt roof shingles or whatever a flexible, durable and long lasting protection is needed. Can be applied by brush, roller, or spray applicator. Equipment cleans easily with water (must be cleaned before coating hardens)
DESIGNED for elastomeric roof mastic and provides an excellent weatherproofing barrier against wind, rain, snow and sand.
RESISTS cracking and chipping due to it's low temp flexibility.
RESISTS UV rays and will expand/contract with the roof base.
REDUCES temperature, thereby reducing air conditioning costs.
This product complies with the California Clean Air Act.
SURFACE PREPARATION It is extremely important to get the roof clean and dry. First remove heavy deposits of dirt, leaves and other debris from the roof using broom or air broomer, then inspect the entire surface for any open seams, tears, cuts, etc. Repair these flaws so water is not blown in under membrane during the cleaning process. Pressure wash roof with water and allow to dry completely. DO NOT APPLY this coating at temperatures below 50deg F (10deg C), in high humidity or potential heavy dew conditions.
Biological Control: Areas of algae, mildew or fungus on the roof membrane or the existing coating
should be treated with a solution of 1 part household bleach and 3 parts water, followed by a power washer rinse using clear water.
DRY TIME 1 1/2 hours drying time. 4 hours for second coat. and 24 hours to cure.
DO NOT Allow this item to Freeze in the container
This product complies with the California Clean Air Act.
