LED Submersible SQ Trailer Light Kit Under 80" Stop / Turn / Tail Boat Trailer classAcustoms

LED Submersible SQ Trailer Light Kit Under 80" Stop / Turn / Tail Boat Trailer classAcustoms

12 volt: You can not put this in a house or plug into a wall - 110/115/220 volt will damage the unit.

DOT APPROVED

Includes both rear trailer tail lights

mounting clips, and wire connectors

Submersible & Sealed Capsule Design for protection against harsh salt water environment

Complete Submersible LED Light Kit for trailers under 80" 

25 foot trailer wiring harness

Includes both rear trailer tail lights

plastic license plate holder

Street side has 18 diodes

Curb side has 14 diodes

Measurements:

4 1/2" x 5 1/2" x 3"  

Class A Customs
1130 County Road 6 West
Elkhart, IN 46514

 
Call Us: (574) 206-0101

 www.classacustoms.com

LED Submersible SQ RV Trailer Light Kit Over 80" Stop / Turn / Tail Boat classacustoms

LED Submersible SQ RV Trailer Light Kit Over 80" Stop / Turn / Tail Boat classacustoms

12 volt
DOT Approved
Waterproof LED Tail Lights
LED Marker Lights (2 Amber)
Wire Harness and Wire Connectors
License Bracket
Street side has 20 diodes
Curb side has 16 diodes
Stud mount lights are 2 bolts on 2" centers
Items are purchased in bulk quantities so no retail box.

Class A Customs
1130 County Road 6 West
Elkhart, IN 46514

 
Call Us: (574) 206-0101

 www.classacustoms.com

Folding Pop-up Camper snowmobile Lid Lock Latches Roof Latch Black or White classAcustoms

Class A Customs Fold Down Camper Latch and Catch for Pop-up and Snowmobile Trailers

Class A Customs Fold Down Camper Latch and Catch for Pop-up Campers and Snowmobile Trailers are now available in

Stainless Steel

Black, Tan or White Powder Coated

All colors are available in Locking Style and Non-Locking Style

Locking style allows for use with a padlock (Padlock not included)

Installation Help

Clean your unit prior to installing item, remove any old sealants and residue.

Check location placement for sufficient clearance and range of motion needed to use latch.

Hand hold item on your unit where desired and mark the screw holes with grease pencil. Use a level to assure the latch and catch are straight.

Do NOT drill any holes in your unit until you have measured and tested the placing of the catch.

Proper framing and support is recommended.

When using gaskets or sealants behind product, keep uniform thickness around perimeter.

Secure product using correct screws (recommended #6 or #8 pan head) verify wall thickness before inserting screws.

Class A Customs

1130 County Road 6 West

Elkhart, IN 46514

Phone: (574) 206-0101

 www.classacustoms.com