75 Gallon Fresh / Gray Water Holding Tank
Tank Measurements +/- .25" on each measurement due to manufacturing process
Installed Fittings See Photos
Two) 1.5" Female NPT Fitting - fitting is sealed to use remove membrane with razor knife
50.5” does not include fittings x 17.5” x 19.5” (rotate tank to change height or width)
Average tank thickness .219 or 7/32" thick (just under 1/4")
Two) 1.5" Female NPT Fitting - fitting is sealed to use remove membrane with razor knife
Two) .5" Female NPT Fitting - fitting is open
Made In USA Class A Customs manufactures these tanks and is located in Elkhart, Indiana
BPA Free Class A Customs does not carry this chemical nor uses it in the manufacturing process
UV-8 Stabilization
Complies with
U.S. FDA 21 CFR 177.1520 (c)3.1a
Canadian HPFB No Objection
Underwriters Laboratories Inc.
EU, 10/2011
NSF International NSF/ANSI Std 61 (sec 4 & 5)
Non-Pressurized Tank all tanks we carry must be vented, Basic Plumbing Example
Fresh or Gray Water Use ideal for rvs, food vendors and extra water storage
Seamless One-piece seamless construction, no seams to burst
Rotatable tank can be placed on any side
Resistant Stain, Corrosion and Rust Resistant
Color Creamy White in color so you can see waterline through tank
Made From Medium Density Polyethylene (MDPE) Resin - glues do not stick to this material and easily cleaned.
For more information and a quote on custom tanks please contact sales on the Contact Us Form include business contact information, CAD drawing or sketches and qty needed.
Fresh and Drinking Water Safe great for rvs, food vendors and extra water storage
BPA Free Class A Customs does not carry this chemical nor uses it in the manufacturing process
NSF Certified Materials Tank & fittings made from DOW NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin
Complies with
U.S. FDA 21 CFR 177.1520 (c)3.1a
Canadian HPFB No Objection
Underwriters Laboratories Inc.
EU, 10/2011
NSF International NSF/ANSI Std 61 (sec 4 & 5)
Non-Pressurized Tank all tanks we carry must be vented, Basic Plumbing Example
Fresh or Gray Water Use ideal for rvs, food vendors and extra water storage
Seamless One-piece seamless construction, no seams to burst
Rotatable tank can be placed on any side
Resistant Stain, Corrosion and Rust Resistant
Color Creamy White in color so you can see waterline through tank
Made From Medium Density Polyethylene (MDPE) Resin - glues do not stick to this material and easily cleaned.
OEM Part
No retail box - no install instructions
Have a certified technician install all parts to prevent product damage and personal injuryHelpful information & answers to common questions can be found on the Water Tank Helps Page
Additional Fittings
To install additional fittings anywhere on the tank we recommend Uniseal Fittings, you can have from .5" up-to 3"
We do not take orders for custom fitting placements or sizes unless bulk ordering, 100 or more of each tank per order.
Custom Water Tank
We
can make a custom tank however due to the cost of a mold ($8,500 and
up) most customers needing only a few tanks find it better to use a tank
we already manufacture.For more information and a quote on custom tanks please contact sales on the Contact Us Form include business contact information, CAD drawing or sketches and qty needed.
Preparation
Sanitize each tank prior to use to remove any debris from the manufacturing process
Sanitize each tank prior to use to remove any debris from the manufacturing process
Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs
Installation & Plumbing
Non-Pressurized Tank all tanks we carry must be vented allowing air in and out when in use, Plumbing Examples
Do Not hook a garden hose directly to tank damage will occur, it is recommended to use a fill dish or other gravity process
Do Not over-tighten fittings as damage will occur.
Non-Pressurized Tank all tanks we carry must be vented allowing air in and out when in use, Plumbing Examples
Do Not hook a garden hose directly to tank damage will occur, it is recommended to use a fill dish or other gravity process
Do Not over-tighten fittings as damage will occur.
It
is recommended to use plastic NPT male fittings with plastic female NPT
fittings to avoid damaging the threads, metal thread fittings can crush
the plastic threads.
Very little, if any, pipe thread tape is needed using too much pipe tape will damage the threads. We do not recommend pipe dope as you can not remove the fitting later, if used be sure to use a food safe brand.
Very little, if any, pipe thread tape is needed using too much pipe tape will damage the threads. We do not recommend pipe dope as you can not remove the fitting later, if used be sure to use a food safe brand.
