Tuesday, February 7, 2017

Ventline Escape Hatches classAcustoms

Ventline no longer makes escape hatches, the sizes and hinge assembly are not the same as Heng's or Jensen brand.

Ventline Escape Hatches and Heng's Escape Hatches have different hinge styles and measurements. We do not carry Ventline Escape Hatches, these will not match a Ventline Hatch - check to see what you have before ordering. Also check your measurements as the escapes hatches are measured and name strange.

Please view the list of Escape Hatches by Heng's below

13 x 20 Escape Hatch by Heng’s Part #  31121-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit)  14 ¼”  X 21"
Exterior Mounting Flange Dimensions (sits on the top of your unit) 16 ¾”  X 23 ¾”  
Lid Measurements 15 ½” x 22 ½”

Lid Only Part # 90007-C1

15 x 22 Escape Hatch by Heng’s Part # 58621-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit) 17 ⅜” X 24 ⅝”   
Exterior Mounting Flange Dimensions (sits on the top of your unit) 19"  X 26 ½”
Lid Measurements 18” x 25”

Lid Only Part # 90008-C1

17 x 24 Escape Hatch by Heng’s Part # 48621-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit)  19 ¼ "  X 26 ¼ "   
Exterior Mounting Flange Dimensions (sits on the top of your unit) 21"  X 28"
Lid Measurements 19 ½” x 26 ⅜”

Lid Only Part # 90088-C1

22 x 22 Escape Hatch by Heng’s Part # 66621-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit)  21 ¼ " x 21 ¼ "  
Exterior Mounting Flange Dimensions (sits on the top of your unit) 23"  x 23"
Lid Measurements 21 ½” x 21 ½”

Lid Only Part # 90129-C1


26 x 26 Escape Hatch by Heng’s Part # 68631-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit)  25 1/2" x 25 1/2"
Exterior Mounting Flange Dimensions (sits on the top of your unit) 27 ½ "  x 27 ½ ”
Lid Measurements 26” x 26”

Lid Only Part # 90014-C1






 

17 x 24 Escape Hatch by Heng’s Part # 48621-C2
Rough Cut-out Opening Dimensions (this is the hole you will need in your unit)  19 ¼ "  X 26 ¼ "   
Exterior Mounting Flange Dimensions (sits on the top of your unit) 21"  X 28"

 





Ventline Escape Hatches and Heng's Escape Hatches have different hinge styles and measurements. We do not carry Ventline Escape Hatches, these will not match a Ventline Hatch - check to see what you have before ordering. Also check your measurements as the escapes hatches are measured and name strange.


 Heng's "Curl" Style Hinge




Lid Only - Not The Entire Vent

Class A Customs RV Roof Vent & Escape Hatch Photos Heng's / Elixir Industries classAcustoms
corner,swing,screw,screws,wheel,tire,upgrade,wholesale,surplus,supply,nation,store,camping,camper,trailer,concession,cargo,motorhome,cabinet,support,5th,travel,plumbing,escape,12,volt,115,rubber,sealant,coating,trim,led,lights,interior,cabinet,hardware,latch,latches
Class A Customs
1130 County Road 6 West
Elkhart, IN 46514
 
Call Us: (574) 206-0101